Always 1 of my Bluetooth adapters has stopped working and I cant get my ps3 OR ps4 controllers working, but that's for another day ha
my audio is from my motherboard Z97 pro wifi ac and its hooked up to a sony amp over optical
Everything was working fine with 8.1 so its definitely win 10 to blame
Surround sound audio is, simply put, sound that completely surrounds you. It means a speaker in virtually every corner of the room, projecting high-quality digital sound at you from all angles just as though you were in a theater.
Oh, but there’s so much more. It also means sound diversification, with deep, thunderous bass rumbling the floorboards as an explosion happens on screen, and subtle sound effects skittering and tapping behind you in a suspenseful scene. For music, it’s being purely enveloped by the song you’re listening to.
In terms of nuts and bolts, it means a set of speakers, usually five, including the all-important “center speaker,” and a subwoofer for powerful bass. This is where the term “5.1” comes from -- five speakers and a subwoofer. If you're interested in buying a surround sound system, be sure to read the definitions below, as well as the breakdown of how the different parts work.
Components of a Surround Sound Speaker System
- Subwoofer
A subwoofer is a large, powered speaker specifically designed to produce bass tones and other low-frequency notes. A subwoofer uses air pressure to create a deep, rumbling sound in order to fill a room with bass noises. Subwoofers are most often placed on the floor in the corner of a room or auditorium for maximum effect across the entire venue. When you’re in a room or theater with loud bass that makes the floor rumble impressively under your feet, that’s the subwoofer you’re feeling. On a PC surround sound system, a subwoofer helps create fantastic bass tones when playing music or a particularly exciting movie. - Center Speaker
The center speaker in a surround sound system is often considered to be the most important speaker of all the speakers in a surround sound system. Usually larger, more versatile, and containing more individual speaker cones than the other satellite speakers, most of the “important sound” is channeled through this speaker. In movies, for example, this means dialog and other important sound effects. High-quality surround sound systems will have a center speaker that is different from the left and right satellites. - Satellite Speakers
A satellite speaker is a general term used for any of the speakers meant to be placed on the left or right sides of the room. In a standard 5.1 system, this means left and right front speakers and left and right rear speakers. That’s a total of four speakers plus the center speaker, which makes five, and then the “.1” represents the subwoofer, which is how the term “5.1” developed. So, 6.1 surround sound means six speakers plus still just one subwoofer. - Equalizer or Mixer
Usually, the equalizer or mixer will just be a part of your PC (or audio receiver, for home theaters). Most computers have built-in equalizers or mixers as part of their sound card output specs, and most audio software, such as iTunes, also comes with its own mixer. On really high-end systems, or on systems which require a lot of power, you may need a separate equalizer as part of a powered amplification system.
- Subwoofer
Types of Surround Sound Speaker Systems
- 2.1 Speaker Systems
2.1 audio systems are not technically “surround sound,” but they are definitely a step up from simple shelf speakers (which don’t have the benefit of a subwoofer). Just as with 5.1 systems, the “2” stands for two satellite speakers -- at the left and right front -- and the “.1” stands for the subwoofer. So 2.1 sound is a great economic solution if you don’t have the money or space for what is called “true” surround sound (at least 5.1 speakers), but you still want high quality, dynamic sound. - 5.1 Surround Sound Speakers
5.1 surround sound and better is often referred to, when the system is of a high enough quality, as “true” surround sound. This is because the five speakers allow for two left and right front speakers, two left and right rear speakers (behind your head), a quality center speaker (thus the “5” in 5.1), and a powered subwoofer for deep, rumbling bass tones (that’s the “.1” in 5.1). When digital surround sound signals (such as Dolby or THX) are played through a system like this, you enter a whole new realm of sound, with thundering explosions, dynamic music, and subtle, encompassing sound effects all around your room. - 6.1, 10.2, and other Multi-Speaker Systems
5.1 surround sound is considered the minimum number of speakers needed for true surround sound. Other common configurations include 6.1 (six speakers and a subwoofer) or 10.2 (ten speakers and two subwoofers). The configuration doesn’t matter a great deal and is mostly dependent upon your room size and personal desire. Most audio experts will tell you that above all, you just need to ensure that the speakers are balanced on each side of the room. In a 6.1 system, the extra satellite usually goes at the back center of the room, to balance out the front center speaker.
- 2.1 Speaker Systems
Always 1 of my Bluetooth adapters has stopped working and I cant get my ps3 OR ps4 controllers working, but that's for another day ha
my audio is from my motherboard Z97 pro wifi ac and its hooked up to a sony amp over optical
Everything was working fine with 8.1 so its definitely win 10 to blame
5.1 surround sound ('five-point one') is the common name for six channel surround sound audio systems. 5.1 is the most commonly used layout in home theatre.[citation needed] It uses five full bandwidth channels and one low-frequency effects channel (the 'point one').[1]Dolby Digital, Dolby Pro Logic II, DTS, SDDS, and THX are all common 5.1 systems. 5.1 is also the standard surround sound audio component of digital broadcast and music.[2]
All 5.1 systems use the same speaker channels and configuration, having a front left and right, a center channel, two surround channels and the low-frequency effects channel designed for a subwoofer.
- 2Application
5.1 Audio Tester
History[edit]
Youtube 5.1 Audio Test
A prototype for five-channel surround sound, then dubbed 'quintaphonic sound', was used in the 1975 film Tommy.[3]
5.1 dates back to 1976[citation needed] when Dolby Labs modified the track usage of the six analogue magnetic soundtracks on Todd-AO 70 mm film prints. The Dolby application of optical matrix encoding in 1976 (released on the film, Logan's Run) did not use split surrounds, and thus was not 5.1. Corel products keygen core download. Dolby first used split surrounds with 70mm film, notably in 1979 with Apocalypse Now. Instead of the five screen channels and one surround channel of the Todd-AO format, Dolby Stereo 70 mm Six Track provided three screen channels, two high-passed surround channels and a low-frequency surround channel monophonically blended with the two surround channels.
When digital sound was applied to 35 mm release prints, with Batman Returns in 1992, the 5.1 layout was adopted. The ability to provide 5.1 sound had been one of the key reasons for using 70 mm for prestige screenings. The provision of 5.1 digital sound on 35 mm significantly reduced the use of the very expensive 70 mm format. Digital sound and the 5.1 format were introduced in 1990, by KODAK and Optical Radiation Corporation, with releases of Days of Thunder and The Doors using the CDS (Cinema Digital Sound) format.
5.1 digital surround, in the forms of Dolby Digital AC3 and DTS, started appearing on several mid 90s Laserdisc releases, with among the earliest being Clear and Present Danger and Jurassic Park (the latter having both AC3 and DTS versions). Many DVD releases have Dolby Digital tracks up to 5.1 channels, due to the implementation of Dolby Digital in the development of the DVD format. In addition, some DVDs have DTS tracks with most being 5.1 channel mixes (a few releases, however, have 6.1 “matrixed” tracks). Blu-ray and digital cinema both have eight-channel capability which can be used to provide either 5.1 or 7.1 surround sound. 7.1 is an extension of 5.1 that uses four surround zones: two at the sides and two at the back.
A system of digital 5.1 surround sound has also been used in 1987 at the Parisian cabaret the Moulin Rouge, created by French engineer Dominique Bertrand. To achieve such a system in 1985 a dedicated mixing console had to be designed in cooperation with Solid State Logic, based on their 5000 series, and dedicated speakers in cooperation with APG.[4] The console included ABCDEF channels. Respectively: A left, B right, C centre, D left rear, E right rear, F bass. The same engineer had already developed a similar 3.1 system in 1973, for use at the official International Summit of Francophone States in Dakar.
Application[edit]
Channel order[edit]
The order of channels in a 5.1 file is different across file formats. The order in WAV files is (not complete) Front Left, Front Right, Center, Low-frequency effects, Surround Left, Surround Right.[5] Twilight breaking dawn part 3 full movie in hindi dubbed.
Music[edit]
Regarding music, the main goal of 5.1 surround sound is a proper localization and equability of all acoustic sources for a centered positioned audience. Therefore, ideally five matched speakers should be used.
For play-back of 5.1 music recommendations of the International Telecommunication Union (ITU) have been released and propose the following configuration (ITU-R BS 775):[6]
5.1 Audio Test Dvd
- five speakers of the same size for front, center and surround
- identical distance from the listeners for all five speakers
- angle adjustment regarding viewing direction of audience: center 0°, front ±22.5° for movies ±30° for music, surround ±110°
See also[edit]
References[edit]
- ^'Understanding Surround Sound Formats'. Crutchfield.com. 23 September 2009. Retrieved 7 March 2011.
- ^'What is 5.1'. Archived from the original on 17 March 2012.
- ^Mosely, John (January 1977). 'Quintaphonic Sound'. Journal of the SMPTE. l86.
- ^'Recherche & Développement'. Archived from the original on 3 August 2008. Retrieved 17 December 2015.
- ^'Multiple channel audio data and WAVE files'. Retrieved 19 November 2015.
- ^Thomas Lund (1 September 2000), Enhanced Localization in 5.1 Production, Audio Engineering Society, retrieved 19 November 2015